Page EN-10
Care and maintenance
Care and maintenance
WARNING
Risk of injury!
Before cleaning the exhaust hood or
■
changing the filter, pull out the mains
plug. If the mains plug is difficult to
access, switch off or pull out the cor-
responding fuse.
CAUTION
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fi re.
Grease residue on the exhaust hood
■
or in the grease filters can catch fire if
exposed to high temperatures. For this
reason, clean the surfaces of the ex-
haust hood and grease filters regularly.
Cleaning the housing
NOTICE
Risk of damage to property!
Do not use any sharp objects or scour-
■
ing powders, as these can scratch the
surface.
We recommend cleaning the surfaces of the
exhaust hood after every use.
• Wipe the surfaces with a soft, damp cloth
and a little dishwashing detergent.
• Clean glass surfaces with standard glass
cleaner.
Cleaning the grease filters
NOTICE
Risk of damage to property!
Handle the grease filters carefully to
■
avoid bending or creasing the fine
mesh.
Only reinsert the grease filters after
■
cleaning once they are fully dry.
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 60°C), or in warm water with
detergent.
1. Remove the mains plug from the socket,
or switch off the mains supply using the
corresponding circuit breaker.
2. Pull the flat panel (14) forwards.
(18)
(17)
(17)
(14)