System Settings; Firmware Update - Kettler E3 - 07682-100 Bedienungsanleitung

System Settings

Press and hold the "SET" key and then press the "RESET" key at
the same time.
By simultaneously pressing the keys, the settings for date / time
/ km or miles display / configured person after switch-on / fac-
tory settings are activated.
First the date setting will appear with the display "DATE". You
can set the day, month and year here.
Pressing "plus" or "minus" changes the flashing displays. Pres-
sing "set" closes the input screen and jumps to the next setting,
time with the display "TIME".
Pressing "plus" or "minus" changes the flashing displays. Pres-
sing "set" closes the input screen and jumps to the next setting.
Here, you can decide whether the values are to be displayed in
kilometres (METR) or miles (ENGL).
Pressing "plus" or "minus" changes the setting. Pressing "set"
closes the input screen and jumps to the next setting, last person
with display "PERS". You decide here whether the current per-
son be configured after the machine has been switched on or
reset.
Pressing "plus" or "minus" changes the setting. Pressing "set"
closes the input screen and jumps to the next setting, factory set-
tings with the display "RSET"
Pressing "minus" and "plus" together restores factory settings
and deletes all data and settings. Pressing "set" skips this func-
tion. The input is completed.

Firmware Update

At the top left of the display "Reset All - / +" the firmware num-
ber is indicated, in this case 3135. On our homepage
www.kettler.net > sport > service center you will find any soft-
ware updates (firmware) for this machine, including installation
instructions for these.
.
+
> =
> =
> =
> =
SI
=>
=>
=>
=>
9
GB