Intended Use; Service Life - Ottobock Sprinter 1E90 Serie Gebrauchsanweisung

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
The product is not suitable for use in everyday prostheses.
2.2 Area of application
• The maximum approved body weight is specified in the technical data
(see Page 15).
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)

2.4 Service Life

As part of a sport prosthesis, an exact service life cannot be determined for
the product since strain varies widely depending on the sport and intensity
of use.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Exceeding the service life and reuse on another patient
Risk of injury due to loss of functionality as well as damage to the product
► Ensure that the approved service life is not exceeded.
► Only use the product on a single patient.
10