Environmental Conditions; Service Life - Ottobock 1C10 Terion Gebrauchsanweisung

Size [cm]
Max. body weight [kg]

2.3 Environmental conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Relative humidity: no restrictions
Chemicals/moisture: fresh water, salt water, chlorine water, soapsuds, sweat, urine
Solids: dust, sand, highly hygroscopic particles (e. g. talcum)
Clean the product after contact with humidity/chemicals/solids, in order to
avoid increased wear and damage (see Page 17).

2.4 Service Life

This product has been tested by the manufacturer with 2 million load cycles
according to ISO 22675. Depending on the patient's activity level, this cor­
responds to a service life of 2 to 3 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Exceeding the service life and reuse on another patient
Risk of injury due to loss of functionality as well as damage to the product
► Ensure that the approved service life is not exceeded (see section
"Service life").
► Only use the product for a single patient.
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
► Use the prosthetic components according to the MOBIS classification
(see section "Area of application").
22 to 23 24 to 25
75
26 to 28
100 125
Ottobock | 13