3M DBI-SALA Nano-Lok Handbuch Seite 15

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 2 identifies key components of the 3M™ DBI-SALA
wound Web Lifelines (A) with an in-line Energy Absorber (B) that retracts into a Nylon Housing (C). A Swivel Eye (D) on the
top of the Housing allows attachment to a valid anchorage connection point with a Carabiner (E), or mounting on a Full Body
Harness with a Harness Interface (F). Figure 1 identifies available Nano-Lok models and their connector configurations. See
Table 1 for Nano-Lok SRD and connector specifications.
Component Specifications:
SRL Housings
Drum
Internal Components
Web Lifeline
Energy Absorber
Swivel
Description
1 Swivel Eye
2 Carabiner
3 Carabiner
4 Single SRD Interface
5 Twin SRD Interface
6 Carabiner
7 Carabiner
8 Rebar Hook
9 Rebar Hook
10 Carabiner
11 Rebar Hook
12 Carabiner
13 Rebar Hook
14 Snap Hook
Performance Specifications:
SRL Specifications (Vertical)
Capacity Range
Maximum Arresting Force
Average Arresting Force
Claimed Maximum Arresting Distance
Minimum Fall Clearance Required
Maximum Free Fall
1 - Assumes the SRL is mounted directly above (overhead) the end user.
2 - Measured from user D-Ring to walking/working surface. Refer to Fall Clearance Chart(s) for details.
Nano-Lok Self-Retracting Devices (SRDs). Nano-Lok SRDs are drum
®
Table 1 – Specifications
Nylon
Nylon
Stainless Steel, Aluminum
Dyneema Polyester
Cover: Nitrile Rubber, Web: Polyester, Stitching: Polyester or Nylon Thread
Zinc Plated Steel
Connector Specifications:
Material
Steel
Aluminum
Steel
Steel
Steel w/Nylon Insert
Aluminum, Steel
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum, Steel
Steel
Aluminum
Steel
59 kg - 100 kg (130 lbs - 220 lbs)
1
1
2
Gate Opening Gate Strength
22.35 mm (0.88 in)
inside diameter
19 mm (3/4 in)
19 mm (3/4 in)
51 mm (2 in)
19 mm (3/4 in)
56 mm (2.19 in)
19 mm (3/4 in)
57 mm (2-1/4 in)
63 mm (2-1/2 in)
52 mm (2 in)
63 mm (2-1/2 in)
19 mm (3/4 in)
57 mm (2-1/4 in)
19 mm (3/4 in)
CE Models
100 kg - 140 kg (220 lbs - 310 lbs)
6 kN (1350 lbs)
4 kN (900 lbs)
0.61 m (24 in)
1.5 m (5 ft)
1.5 m (5 ft)
15
Tensile Strength
X 22.2 kN (5,000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3,600 lbs 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs) 22.2 kN (5000 lbs)
16 kN (3600 lbs 22.2 kN (5000 lbs)
6 kN (1350 lbs)
4 kN (900 lbs)
0.61 m (24 in)
1.8 m (5.8 ft)
1.5 m (5 ft)