1. Safety precautions
This product complies with the requirements of the following European Community
Directives: 2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage) as
amended by 2004/22/EC (CE-marking).
To ensure safe operation of the equipment and eliminate the danger of serious injury due
to short-circuits (arcing), the following safety precautions must be observed.
Damages resulting from failure to observe the safety precautions are exempt from any
legal claims whatever
Warning !
* Do not operate the device near combustible or flammable materials and / or in rooms and
in explosive environments.
* Do not connect meter to test devices with voltage-leading chassis. Failure to observe
may cause injury by electric shock.
* Use only suitable power sources to charge internal, rechargeable battery, otherwise the
battery can be damaged.
* Do not remove the housing. Failure to observe may cause injury from electrical shock
and / or the risk of damage and destruction of internal circuitry.
* Make sure that no water gets into the inside of the instrument (risk of short circuit).
* Big and sudden temperature differences can cause condensation on / in the machine.
Upon detection of condensate provide the unit in a warm room and turn on only after
evaporation of condensate and put into operation.
* - Measurement equipment do not belong in children's hands -
-38-