Safety Precautions - PeakTech 2170 Bedienungsanleitung

1. Safety Precautions

This product complies with the requirements of the following
directives of
2014/30/EU (electromagnetic compatibility), 2014/35/EU (low
voltage), 2011/65/EU (RoHS)
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing) the
following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
General:

Read these operating instructions carefully and make
them available to subsequent users.

It is essential to observe the warning notices on the
device, do not cover or remove them.

Familiarize yourself with the functions of the measuring
device and its accessories before taking the first
measurement.

Do not operate the measuring device unsupervised or
only protected against unauthorized access.

Use the measuring device only for the purpose of its
determination and pay particular attention to warning
notices on the device and information on the maximum
input values.
Electric safety:

This measuring device is not used to measure voltages
and must not be connected to a voltage source.

Before starting a measurement, use a suitable measuring
device to check that the object to be measured is de-
energized.
the European Union for CE conformity:
35