Herunterladen Inhalt Inhalt Diese Seite drucken

PeakTech DVB-S2 Bedienungsanleitung Seite 46

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Satellite signal input port; connect directly to satellite antenna with coaxial
1
cable (DVB-S)
2
For turn-on/ turn-off. To press and hold for 3 seconds to power on/off
Key panel for numerical settings directly
MENU
3
EXIT
Arrow
keys
4
OK
F1
F2
T/R
FIND
5
AN/DG
H/V
0/22K
6
LCD Display
LED's for:
Power
BATT
7
LOCK
22K
13V
18V
8
Flash light
9
Battery compartment for Akku 11,1V / 2600mAh
10
Aufstellbügel
Enters and exits the main menu
Exits from the present menu and backs to the previous one
the device
Use Arrow key to browse the item
- OK-key to confirm the selection
- Double click of OK-key to edit a value, list of satellites /
transponders or to display submenus
Changes the signal bar on DISH SETUP menu
Actives DiSEqC 1.2 function on the DISH SETUP menu
Selects and plays TV/RADIO channel in playing mode.
Accesses easy satellite find menu that sets and aligns a
satellite dish quickly.
Actives the spectrum on the DISH SETUP menu
A quick key to switch 13/18V output on the DISH SETUP
menu
A quick key to switch 22K output on the DISH SETUP menu
or AV IN/OUT switch
The meter is powered on
- Light is Red indicates the meter is being charge
- Light is Green indicates the meter is full charged
This light will be on when Satellite signal is locked.
22kHz Modus
Vertical Polarisationvoltage
Horizontal Polarisationvoltage
-43-

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dvb-s

Inhaltsverzeichnis