PeakTech DVB-S2 Bedienungsanleitung Seite 72

Backup of the channel list to USB
1) Select the green H/V-button to select "Channel Data".
2) Use the blue <(FIND)> button to backup the currently available data channel to
secure the USB storage. The following files appear on the USB memory:
3) You can edit the files stored on the PC, the "Sattp" files contain only the transponder
data and "program" also includes transmitter already found.
4) After editing the data, connect the USB memory to the unit again and replace the
reworked files in the Software Update menu.
5) Select the desired channel data update with the ◄Left/Right► and ▲Up/ Down▼
arrow keys and confirm the selection with the OK button. After a few seconds the
data is loaded into the device and can be used.
6) The firmware is not stored as a backup file on the USB memory. A firmware update
with separate instructions can only be received on request, since a faulty update can
damage the unit.
-69-