Dvb-S/S2 Setup - PeakTech DVB-S2 Bedienungsanleitung

6.3. DVB-S/S2 Setup

To perform a channel scan for DVB-S or DVB-S2 satellite signals after setting, use the
DVB-S / S2 signal search menu, which is displayed as follows:
1. Satellite:
Press the OK button to display the satellite list. Select the desired satellite using the
▲Up/down▼ and ◄Left / Right► button. Confirm your selection with the OK button.
2. LNB:
Select the appropriate LNB, for which you have set the settings in the previous menu
"LNB configuration".
3. Dish position: Displays the selected in "LNB configuration" settings for DiSEqC.
-48-