Safety Precautions - PeakTech 2170 Bedienungsanleitung

1. Safety Precautions

This product complies with the requirements of the following
European
(Electromagnetic Compatibility) and 2006/95/EC (Low Voltage)
as amended by 2004/22/EC (CE-Marking).
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing) the
following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
*
*
*
*
*
*
*
*
*
*
*
Downloaded from www.Manualslib.com
Community
Do not use this instrument for high-energy industrial
installation measurement.
Do not place the equipment on damp or wet surfaces.
Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
Disconnect test leads or probe from the measuring circuit
before switching modes or functions.
To avoid electric shock, disconnect power to the unit under
test and discharge all capacitors before taking any
resistance measurements.
Do not conduct voltage measurements in resistance
measurement function!
Check test leads and probes for faulty insulation or bare
wires before connection to the equipment.
Please use only 4mm-safety test leads to ensure
immaculate function.
To avoid electric shock, do not operate this product in wet
or damp conditions. Conduct measuring works only in dry
clothing and rubber shoes, i. e. on isolating mats.
Never touch the tips of the test leads or probe.
Comply with the warning labels and other info on the
equipment.
manuals search engine
Directives
-34-
2004/108/EC