Positioner Menu - PeakTech DVB-S2 Bedienungsanleitung

6.5. Positioner Menu

To access the menu for the positioning of electronically moving parabolic antenna, select
the "Positioner Setup" with the arrow keys from the main menu and press the OK button:
Satellite
Transponder
Continuously move
Move Steps
Step Size
Limit Set
Other Commands
USALS
Select the satellite with the ◄Left/ Right► arrow keys.
Select a suitable transponder with the ◄Left/ Right►
arrow keys.
Use the parabolic antenna to move the ◄Left/ Right►
arrow keys continuously to the left or right and press the
OK button to save the current position.
Use to move the ◄Left/ Right► arrow keys to move the
dish in steps to the left or right and press the OK button to
save the current position.
Use to set the ◄Left/ Right► arrow keys to set the step
size in degrees (1 ~ 10) and the OK button to save the
current setting.
Use to set the ◄Left/ Right► arrow keys to limiting the
rotational position and the OK button to save the current
setting.
Use to set the ◄Left/ Right► arrow keys to limiting the
rotational position and the OK button to open a selection
menu.
Use to switch the ◄Left/ Right► arrow keys to move
between USALS (antenna positioning by reference
satellite) ON and OFF.
-55-