Lubrication - Dürkopp Adler 577-1111 Bedienungsanleitung

7.2

Lubrication

1
Maintenance work to be carried
out
Hook lubrication
Check oil level in the supply
container 1.
Lubrication of the machine head
Check oil level in the supply
container 2.
CAUTION: DANGER OF ACCIDENTS !
Oil can irritate the skin!
Avoid long contacts with the skin!
Wash the contaminated skin thoroughly!
NOTE !
The handling and the disposal of mineral oils is subject to legal
regulations.
Deliver waste oil exclusively to an authorized reception center!
Protect your environment, do not spill any oil!
For filling the oil supply containers, used exclusively the lubrication oil
ESSO SP-NK 10 or an equivalent oil with the following specification:
–
Viscosity at 40°C:
–
Point of inflammation:
The oil can be obtained from the sales centres of
DÜRKOPP ADLER AG under the following reference numbers:
–
2-Litre container:
–
5-Litre container:
2
Explanation
Tilt the machine head backwards.
Fill the oil supply container 1 through the respective hole up to
the mark "max".
The oil level should not drop below the mark "min".
If required, fill the oil through the hole in the sight glass up to
the mark "max".
2
10 mm /s
150°C
9047 000013
9047 000014
1
Service
hours
8
40
27