Table 7: Input Specifications; Table 8: Output Connection; Table 9: Output Contact Specifications; Table 10: Connection Of The Remote Pressure Sensor - DAB ACTIVE DRIVER PLUS M/T 1.0 Installations- Und Wartungsanleitungen

Minimum activation voltage [V]
Maximum deactivation voltage [V]
Maximum admissible voltage [V]
Current absorption at 12V [mA]
N.B. Inputs can be controlled with both polarities (positive or negative with respective return to earth)
2.3.4 Connection of the user outputs
The user outputs are available only in type M/T and T/T inverters.
The wiring diagram and the electrical characteristics of the outputs are shown below.
Type of contact
Max. admissible voltage [V]
Max. admissible current [A]
2.3.5 Connection of the remote sensor
Input characteristics for type M/T and T/T inverters

Table 7: Input specifications

User outputs wiring diagram
Type of Name of
inverter connector
M/T J13
T/T J6

Table 8: Output connection

Figure 3: Output connection

Output contact specifications

Table 9: Output contact specifications

Connection of the remote sensor
Type of inverter
M/T
T/T
M/M

Table 10: Connection of the remote pressure sensor

ENGLISH
DC inputs [V]
8
2
36
3,3
Pin
Out 1
1-2
3-4
Out 2
Out 1
1-2
3-4
Out 2
NO
250
5 -> resistive load
2,5 -> inductive load
Name of connector
J8
J10
J6
62
AC inputs 50-60 Hz [Vrms]
8
1,5
24
3,3
Output