Bosch TCE 330-TCE 230 Originalbetriebsanleitung Seite 26

en 26 | TCE 330-TCE 230 | Commissioning
2. Secure the retaining panel to the support using 4
bolts.
Fig. 4: Retaining panel
3. Secure the sliding arm to the lateral holder using 4
bolts.
¶
Tightening torque: 65 N*m
Fig. 5: Sliding arm
i
Lubricate the parts to be joined before installation.
|
1 695 102 028 2014-10-10
Fig. 6: Parts to be lubricated
4. Thread the hinged arm into the upper part of the
support and secure it using a bolt and washer.
i
Tightening torque: 170 N*m
Fig. 7: Upper hinged arm.
i
To ensure safe and ergonomic use, a minimum distance
of 500 mm must be maintained from the next wall
when setting up the tire changing machine with the
TCE 330-TCE 230 installed. When doing so, remember
to allow for the maximum space requirement when
extending the moving parts into operating position.
Robert Bosch GmbH