Bosch TCE 330-TCE 230 Originalbetriebsanleitung Seite 32

en 32 | TCE 330-TCE 230 | Operating instructions
3. Turn the rim-chuck plate until the bead is fully locat-
ed inside the rim.
i
The helper follows the rotation of the tire on the rim-
chuck plate. Stop the rotation when the helper has
reached a position of approx. 270° relative to the
position of the mounting tool.
Fig. 18: Feeding the bead into the rim
!
Make sure that the bottom tire bead does not slip
out of position (excessive pressure).
4. Remove the helper and the sliding arm of the master
roller.
|
1 695 102 028 2014-10-10 Robert Bosch GmbH