Initial Operation; First Use - VOLTCRAFT B5 Bedienungsanleitung

8. Initial operation

The charger must be used with a stabilised direct current voltage (11-18V=).
Never use the charger with another voltage as this will destroy the charger and
invalidate the warranty/guarantee!
Depending on the battery connected, a charge current of up to 5A is possible.
For this reason, the electrical supply chosen must be strong enough.
Connect the supplied connector cable (2 crocodile clips on 1 circular connector) with the power
supply, plug the circular connector into the appropriate socket in the charger (see chapter 7,
position 1).
The charger emits a brief audio signal and the LCD display is illuminated. The charger is now
on the main menu:
Example:
NiMH CHARGE NiMH CHARGE NiMH CHARGE
NiMH CHARGE NiMH CHARGE
CURRENT CURRENT
CURRENT CURRENT CURRENT
Before a battery can be attached and charged, the appropriate battery type and
desired values must first be selected. Please heed the information contained
within the next chapter.
46
2.0A 2.0A
2.0A 2.0A 2.0A