Initial Operation; Care And Cleaning; Technical Data - VOLTCRAFT QCP-3000 Bedienungsanleitung

Initial o peration
• Connect the USB charger to your smartphone or tablet that you want to charge.
For this purpose please use preferably the original USB cable that comes with the
smartphone or tablet. When other cables are used, the charging current can be
reduced.
• Plug the USB charger into a proper mains socket.
• The USB charger now adjusts to the compatible output voltage depending on the connected
device. According to the connected device, the USB charger provides the maximum possible
output current.
The USB charger supports the charging standard
„Qualcomm Quick Charge 3.0" (compatible with „Quick
®
Charge 2.0" and „Quick Charge 1.0").
By automatically detecting the connected device, the USB charger provides the compatible
output voltage or output current. As a result, the charging process for compatible devices can
be significantly accelerated.
When no device is detected for „Quick Charge", the USB charger always provides an output
voltage of 5 V/DC, which complies with the USB standard. As a result, conventional USB
devices too can be connected and charged.
When an Apple device (for e.g., iPhone or iPad) is connected, the USB charger provides in
this case the maximum possible charging current depending on the device (for e.g., for an
iPad up to 2.4 A).
• When the charging process of the connected device has ended, disconnect the USB device
from the mains socket. Unplug the USB charger from the connected device.

Care and cleaning

• Always disconnect the product from the power supply before cleaning, unplug it from the
mains socket.
• Use a dry, lint-free cloth to clean the product.
• Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these
could damage the housing or even impair operation.
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.

Technical data

Input voltage ................................. 100 - 240 V/AC, 50/60 Hz
Output voltage/output current ....... 3.6 - 6.5 V/DC, max. 3 A
...................................................... 6.5 - 9 V/DC, max. 2 A
...................................................... 9 - 12 V/DC, max. 1.5 A
The USB charger supports the charging standard „Qualcomm
(compatible with „Quick Charge 2.0" and „Quick Charge 1.0").
By automatically detecting the connected device, the USB charger provides the
compatible output voltage or output current. As a result, the charging process for
compatible devices can be significantly accelerated.
When no compatible device is detected, the USB charger always provides an output
voltage of 5 V/DC, which complies with the USB standard. As a result, conventional
USB devices too can be connected and charged.
When an Apple device (for e.g., iPhone or iPad) is connected, the USB charger pro-
vides in this case the maximum possible charging current depending on the device
(for e.g., for an iPad up to 2.4 A).
You can find a list of compatible devices under the following internet address:
www.qualcomm.com/products/snapdragon/quick-charge
Short-circuit protection .................. yes
Overload protection ...................... yes
Ambient conditions ....................... Temperature 0 °C to +40 °C, air humidity 10% to 95%
relative, non-condensing
Dimensions ................................... 62 x 44 x 23 mm (L x W x H)
Weight .......................................... 54 g
Quick Charge 3.0"
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE. 1508316_V2_1216_02_VTP_m_en