User Set" Configuration Menu - VOLTCRAFT B5 Bedienungsanleitung

10. "USER SET" configuration menu

USER SET USER SET
USER SET
USER SET USER SET
DEC
TEMP CUT OFF TEMP CUT OFF TEMP CUT OFF
TEMP CUT OFF TEMP CUT OFF
ON ON
ON ON ON
SAFETY TIMER SAFETY TIMER
SAFETY TIMER SAFETY TIMER SAFETY TIMER
ON ON ON
ON ON
CAPACITY CUT OFF CAPACITY CUT OFF CAPACITY CUT OFF
CAPACITY CUT OFF CAPACITY CUT OFF
ON ON
ON ON ON
KEY BEEP KEY BEEP KEY BEEP
KEY BEEP KEY BEEP
BUZZER BUZZER
BUZZER BUZZER BUZZER
INPUT POWER LOW INPUT POWER LOW
INPUT POWER LOW INPUT POWER LOW INPUT POWER LOW
CUT-OFF CUT-OFF CUT-OFF
CUT-OFF CUT-OFF
INC
BACK-LIGHT BACK-LIGHT
BACK-LIGHT BACK-LIGHT BACK-LIGHT
Batt Type/Stop
PROGRAM-> PROGRAM-> PROGRAM->
PROGRAM-> PROGRAM->
Start/Enter
INC DEC
180min 180min 180min
180min 180min
INC DEC
5000mAh 5000mAh
5000mAh 5000mAh 5000mAh
INC DEC
INC DEC
10.0V 10.0V 10.0V
10.0V 10.0V
INC DEC
100% 100% 100%
100% 100%
Select the option "USER SET" from the main
menu using the "Batt Type/Stop" key, confirm
with the "Start/Enter" key.
Does not apply to this charger model.
50C 50C
50C 50C 50C
The safety timer starts automatically when
charging begins; it protects the battery from being
overloaded (or if the delta-U cut-off mechanism
cannot find a peak). Do not set the time to be
shorter than the anticipated charging time!
Set the maximum battery charge capacity here.
This also protects against overloading (or if the
delta-U cut-off is not working).
"KEY BEEP" can be used to switch the key press
ON ON ON
ON ON
sound on or off. "BUZZER" can be used to switch
the alarm signifying an error in charging or
ON ON
ON ON ON
changes in the charging process on or off.
This function monitors the voltage at the charger
input (e.g. for a 12V battery). If the voltage drops
below the configured value, the charging process
is stopped.
Adjust the background lighting brightness here.
49