2. Design and function
2.2 Description
The model DI35-M digital indicator is a multi-function and very accurate instrument for a
wide variety of measuring tasks.
EN
The model DI35-M digital indicator has a multi-function input with 29 different calibrated
input configurations that can be selected via terminal connections and the input signal in
the instrument configuration. The display can permanently show the MIN or MAX value.
Moreover, a totaliser function is integrated.
In addition, both versions offer the possibility to calibrate sensors and linearise using
up to 30 points. This allows further adaptation of the display values to different sensor
signals and application requirements. The standard features are completed by a trans-
mitter power supply, a HOLD function and a TARE function for the correction of offset
shifts and sensor drifts. The sampling rate and display time can be configured and the
display can be dimmed. Unauthorised alteration of the set instrument parameters can
be prevented via different user levels, in conjunction with a freely selectable access
code.
Optionally available are up to four freely configurable switch contacts, an analogue
output signal and a serial interface.
Functions
Analogue output
■
Retrieval of the MIN/MAX value
■
HOLD and TARE function
■
Linearisation of the measuring input
■
Semiconductor switching outputs (option)
■
Switch point display (option)
■
Adjustable switch points (option)
■
2.3 Scope of delivery
Digital indicator
■
Sealing
■
2 mounting elements
■
Operating instructions
■
Unit characters
■
Cross-check scope of delivery with delivery note.
8
WIKA operating instructions digital indicator, model DI35-M