Zero Point Suppression; Display Brightness; Setting The Analogue Output (Option); Start And End Value - WIKA DI35-M Betriebsanleitung

7. Description of program numbers

7.2.6 Zero point suppression

A defined indication range is represented by 0000. With this function a fluctuating
indication of the zero point is avoided.
Example: Parameter 10 = indication range -10 ... +10 is displayed as 0000.
PN Function
18 Zero point suppression

7.2.7 Display brightness

PN Function
19 Display brightness

7.3 Setting the analogue output (option)

The analogue output gives the measured values of the digital indicator as a standard
signal (DC 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA).

7.3.1 Start and end value

The analogue output can be assigned any measuring input. The output signal is
updated simultaneously with the measuring input. The refresh rate is determined by
the configured measuring time. The start and end value for the analogue signal can be
assigned user-defined measured values.
The start and end values define at which display value the minimum and maximum
output signal will be given. The display value is dependent upon the setting of the input
signal (→ see chapter 7.1.1 "Input signal")
PN Function
20 Full scale
21 Start value
WIKA operating instructions digital indicator, model DI35-M
Parameter
0 ... 99999
Parameter
0 ... 9 (0 = bright, 9 = dark)
Parameter
-9999 ... 99999
-9999 ... 99999
EN
31