WIKA DI35-M Betriebsanleitung Seite 47

8. Faults
Faults
Program numbers are not
available
Instrument displays "Err1"
Digital input does not react
Illustration of overrange
WIKA operating instructions digital indicator, model DI35-M
Causes
Access through user authorisation
denied
Set sensor type is preventing the
desired program number from
being parameterised
The analogue output is an option.
If this is not implemented, then the
Program numbers greyed out
Illustration of underrange
Measures
Contact the manufacturer
Measure input current of
digital input. It should lie
between 1 ... 3 mA.
EN
47