Number Of Decimal Places; Offset Adjustment - WIKA DI35-M Betriebsanleitung

7. Description of program numbers

7.1.3 Number of decimal places

Specifies the number of decimal places that are displayed on the screen. This
parameter has no influence on the scaling of the indication value.
EN
PN Function
3 Number of decimal places
1) Unit is not shown on the display.

7.1.4 Offset adjustment

The input signal is shifted in parallel by the offset value.
PN Function
5 Offset value
26
This parameter can be altered directly by making a tare if this was
triggered through the multi-function button or the digital input.
WIKA operating instructions digital indicator, model DI35-M
Parameter
00000 ... 0.0000
(not for temperature measurement)
Resistance thermometers
(PN0 = 13 ... 20)
0 = 8888.8 (°C)
1)
1 = 8888.8 (°F)
1)
2 = 8888 °C
3 = 8888 °F
4 = 888.8 °C (-99.9 ... 999.9)
5 = 888.8 °F (-99.9 ... 999.9)
Thermocouple
(PN0 = 21 ... 29)
0 = 8888.8 (°C)
1)
1 = 8888.8 (°F)
1)
2 = 8888 °C
3 = 8888 °F
Parameter
Analogue/resistance measure-
ments and sensor calibration
(PN0 = 1 ... 12 and 30 ... 45)
-9999 ... 99999
Temperature sensors
(PN0 = 13 ... 29)
Measuring range