Operation; Button Functions; Accessing And Exiting Programming Mode - WIKA DI35-M Betriebsanleitung

6. Operation

6. Operation

6.1 Button functions

Button
Button [☼]
Button [☼] + [▼] [▲]
Button [▼]
Button [▲]
Button [○]

6.2 Accessing and exiting programming mode

Accessing programming mode
▶
Press [☼].
⇒
Digital indicator is in programming mode
⇒
Lowest available program number is displayed.
→ Available program numbers are dependent upon the authorisation level, see chapter
7.6.1 "Flashing display on reaching the switch points".
Exiting the programming mode
If no buttons are pressed within 7 seconds, the digital indicator switches back to display
mode.
WIKA operating instructions digital indicator, model DI35-M
Function
Programming mode is accessed
Pressing < 1 s: Changes the cursor position
Pressing > 1 s: Saves all parameters
Scrolls through the program numbers (PN)
Pressing > 1 s: Automatically starts cycle
Pressing < 1 s: Selects or changes parameter
Pressing < 1 s: Selects or changes parameter
Multi-function button
Selects functions (e.g. HOLD or TARE)
EN
21