Cancelling The Password Protection; Setting The Switching Outputs; Flashing Display On Reaching The Switch Points - WIKA DI35-M Betriebsanleitung

7. Description of program numbers

7.5.2 Cancelling the password protection

The password protection is cancelled when the release code corresponds to the locking
code.
If the locking code is lost, the instrument can be reset by the
manufacturer.

7.6 Setting the switching outputs

The switching outputs can be configured independently.

7.6.1 Flashing display on reaching the switch points

A switch point being exceeded can be signalled via a simultaneous flashing of the
7-segment display and switch point display.
PN Function
59 Flashing display
Reading the switching status
The switching status of the switching outputs can be read from the switch point display.
WIKA operating instructions digital indicator, model DI35-M
Parameter
0 = not flashing
1 = at switch point 1
2 = at switch point 2
3 = at switch point 3
4 = at switch point 4
5 = at switch point 1 + 2
6 = at switch point 3 + 4
7 = at switch point 1 + 2 + 3 + 4
Switch point display
EN
35