Setting User Authorisations; Authorisation Levels - WIKA DI35-M Betriebsanleitung

7. Description of program numbers

7.5 Setting user authorisations

7.5.1 Authorisation levels

Via the user authorisation, it is possible to limit which settings can be made by the
EN
operator. The authorisations can be allocated in different authorisation levels.
Function
Changing the display brightness
Allocating the locking code
Reading the serial number
Changing switch points
Setting the switching output
Setting the interface
Setting the analogue output
Setting measuring inputs
Carrying out a linearisation
Inputting a release code
Changing the authorisation level
The authorisation levels can only be changed if the release code corresponds to the
locking code (password protection). On delivery, both parameters are set to the value
0000, whereby the programming lockout is deactivated.
The control level is selected via PN53. The simple control level serves as the basic
setting. Only those program numbers which sufficiently enable the digital indicator to
be put into operation are displayed. With this, the assigned start and end values for
the measuring signal are automatically transferred to the analogue output. (→ For the
accessible program numbers see "Appendix 1: Overview of program numbers"
The professional control level allows access to all program numbers and enables the
programming of complex applications.
PN
50
51
52
53
34
PN
19
50
200
61, 71, 81, 91
59 ... 95
32 ... 34
20 ... 22
0 ... 18
100 ... 130
51
52
Function
Locking code
Release code
Authorisation level
Control level
WIKA operating instructions digital indicator, model DI35-M
Authorisation level
1 2 3 4
   
   
   
   
   
   
   
-
  
-
  
- - -

- - - -
Parameter
0000 ... 9999
0000 ... 9999
0 ... 8
1 = simple
2 = professional
5 6 7 8
   
   
   
-
  
- -
 
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -