Reset; Display Change To Totaliser Value; Reading The Serial Number; Restore Factory Settings - WIKA DI35-M Betriebsanleitung

7. Description of program numbers

7.8.2 Reset

PN Function
184 Reading value, start value
185 Trigger for reset

7.8.3 Display change to totaliser value

PN Function
186 Trigger for display change
7.9

Reading the serial number

PN Function
200 Serial number

7.10 Restore factory settings

The factory settings can only be restored if the programming lock PN 50 allows access
to all PNs or HELP is displayed. All application-specific data will be lost.
1. Switch off the power supply.
2. Press the multi-function button.
3. Apply power supply and hold the multi-function button for 2 s.
⇒
Factory settings are restored.
WIKA operating instructions digital indicator, model DI35-M
Parameter
0 ... 99999
0 = no trigger
1 = multi-function button
2 = digital input
3 = multi-function button or digital
input
4 = [▲] or [▼] while totaliser value is
displayed
Parameter
0 = no trigger
1 = multi-function button
2 = digital input
Parameter
0 ... 99999
EN
45