Clean The Platen Roller - Rimage Everest III Benutzerhandbuch

Rimage Everest™ III and 600 User Guide

Clean the Platen Roller

-
Important! Clean the platen roller only if you notice a diminished print quality, such as white specks on the printed disc.
#
Tools required:
•
Sponge swabs with long handles (included in the Everest cleaning kit)
•
99% Isopropyl alcohol
Prepare to clean the platen roller.
1.
a. At the rear of the printer, turn the mode switch
to position 3 (diagnostic mode).
b. Make sure the printer is powered on.
2. Access the platen roller.
a. Press the two side cover latches to release the
side cover.
b. Lower the side cover.
c. Open latches 1, 2, and 3.
d. Remove the print ribbon carrier. For specific instructions, refer to the
25.
e. Pull out the retransfer ribbon carrier. For specific instructions, refer to the
on page 28.

Note: The retransfer ribbon carrier cannot be removed from the printer.
3. Press and hold the operator button for 2 seconds to access Diagnostic Test 1. The platen roller begins to rotate and the
front panel Active indicator light blinks.
4. Clean the platen roller (to the right of the print head).
a. Apply isopropyl alcohol to the sponge swab.
n
Caution! Do not apply pressure when cleaning
the platen roller with the sponge swabs. Applying
pressure may damage the platen roller, leaving
scratch marks on the printed disc.
b. As the platen roller rotates, use the sponge swab to
wipe the platen roller.
Tip: As you wipe the platen roller, allow it to rotate a
full turn before moving to the next area.
5. Press and release the operator button to exit diagnostics
mode.
Prepare the printer for use.
6.
a. Install the print ribbon carrier.
b. Install the retransfer ribbon carrier.
Close all latches.
c.
d. Close the side cover.
e. Turn the mode switch to the correct operating position.
For more information, refer to the
page 14.
The printer is ready for use.
34
section on
Switches
Change the Print Ribbon procedure on page
Change the Retransfer Ribbon
procedure
Platen
Roller
Print
Head
2000621_B