Clean The Print Head; Required Tools - Rimage PrismPlus! Benutzerhandbuch

Clean the Print Head

Clean the print head at every ribbon change, or more often if streaks start to appear or the ribbon has torn.

Required tools

#
•
Prism cleaning kit (PN 210555-001)
•
A disc
•
99% Isopropyl alcohol
•
Cotton swabs
1. Prepare the
a. Power off the
b. Remove the
c. Remove the
page 19.
d. While pressing and holding the
on the Prism.
e. When the disc not present indicator light flashes, release
the operator button.
2. Prepare the
a. Remove the
The cleaning pad is available in the cleaning kit.
b. Attach the
3. Clean the print head.
a. Place the
printer tray.
b. Press the
c. Place 5 drops of
d. Press the
start the cleaning cycle. When the cleaning cycle is
complete, the printer tray opens.
e. If necessary, repeat step d.
f. Remove the
4. Clean the front two ribbon guides.
a. Apply isopropyl alcohol to a clean
b. Run the swab against a ribbon guide to clean it.
c. Repeat steps a – b for the second ribbon guide.
5. Prepare the
a. Power off the
b. Reinstall the
c. Replace the

Note:
Prism.
d. Power on the
The Prism is ready for use.
110635_J
Downloaded from www.Manualslib.com
:
Prism.
Prism.
top cover.
ribbon. Refer to Change the Print Ribbon
operator button, power
cleaning pad.
adhesive backing from the cleaning pad.
cleaning pad to the top of a disc.
cleaning pad with the attached disc on the
pad down over the sensor.
isopropyl alcohol on the cleaning pad.
operator button to close the printer tray and
cleaning pad with attached disc.
cotton swab.
Prism for use.
Prism.
ribbon.
top cover.
If the printing pad on the tray becomes wet, allow the printing pad to completely dry before using the
Prism.
manuals search engine
Maintain the Prism Printer
on
Press Pad Down
Over Sensor
Cleaning Pad with
Attached Disc
Front Ribbon
Guides
Cleaning Pad
Cleaning
Solution
17