Set The Media Type, Media Size, Orientation And Ribbon Type (Pc); Set The Print Quality, Color Matching And Image Adjustments (Pc) - Rimage Everest III Benutzerhandbuch

Rimage Everest™ III and 600 User Guide

Set the Media Type, Media Size, Orientation and Ribbon Type (PC)

1. Access printing preferences. Refer to page 17 for instructions.
2. Select the Main tab.
3. View or change the printing preferences.
a. Select the appropriate Media Type.
b. Select the appropriate Media Size.
c. Select the desired number of Copies.
d. Select the desired Orientation.
e. Select the appropriate type of Ribbon.
If you select CMY+White for the ribbon type, select Manual or Auto.
•
Select the Manual radio button to manually determine where you would like the a white background to be
applied.
If you select Manual, select Step 1 (CMY) or Step 2 (White).

Note: The Manual options are intended to be used as part of a two-print sequence on the same disc. For the
first print, select Step 1, and for the second print select Step 2.
•
Select the Auto radio button if you want a white background to print automatically.
If you select Auto, select Complete white undercoat or Make pure white transparent from the dropdown list:
Select Complete white undercoat to apply a white background to the entire printable area of the disc. The
ƒ
printable area is defined on the Advanced tab.
Select Make pure white transparent to print only the areas of the label that are not pure white. Pure white
ƒ
label areas print as transparent areas on the disc surface.
4. When you have made the desired choices in the Rimage Everest Printing Preferences window, select Apply.
5. Select OK to close the Rimage Everest Printing Preferences window.

Set the Print Quality, Color Matching and Image Adjustments (PC)

1. Access printing preferences. Refer to page 17 for instructions.
2. Select the Advanced tab.
3. View or change the printing preferences.
a. Select the desired Print Quality.
•
For the Everest 600, select Photo or Graphics.
•
For the Everest III, select Normal or Best.
b. Select the desired criteria for Color Matching.

Note: The default setting for color matching is Match for CMYK printing.
c. From the Image dropdown list, select None, High contrast, Vivid colors, or Custom.
If you select Custom, the Settings button becomes active:
i. Select the Settings button. The Custom Settings window opens.
ii. Select the desired Print Threshold Settings.
iii. Move the Contrast Boost slider to adjust the image contrast.
iv. Move the Saturation Boost slider to adjust the image saturation.
v. Select OK to close the Custom Settings window.
4. When you have made the desired choices in the Rimage Everest Printing Preferences window, select Apply.
Select OK to close the Rimage Everest Printing Preferences window.
5.
18 2000621_B