Check The Ribbon Remaining; View The Ribbon Status (Pc) - Rimage Everest III Benutzerhandbuch

4. View or change the print alignment settings.
a. Move the All Color slider in the Horizontal Alignment Settings pane to modify the horizontal alignment for all ribbon
types.
b. Move the Color slider in the Vertical Alignment Settings pane to modify the vertical alignment for prints with a CMY or
CMY+W ribbon.
c. Move the Monochrome slider in the Vertical Alignment Settings pane to modify the vertical alignment for prints with a
monochrome ribbon.
5. View or change the color density settings.
a. Select the Density tab. The density settings display.
Move the Cyan, Magenta, and Yellow sliders to modify the color density settings.
b.
c. Move the Black slider to modify the grayscale density settings.
6. Select Save to save the modified settings. The Everest Utility closes.

Check the Ribbon Remaining

The operator panel on Rimage Producer IIIN, Producer III, and Professional autoloaders displays the estimated number of
prints remaining on the print ribbon and the retransfer ribbon.
For standalone Everest printers and AutoPrinters, you can check the amount of ribbon remaining using the Status feature of
the printer driver. Use the following procedure to check the amount of ribbon remaining for a Everest printer or AutoPrinter.

View the Ribbon Status (PC)

The Status tab of the Status Monitor window for Windows allows you to view the estimated percentage and number of prints
remaining on the print and retransfer ribbons.
1. Access printing preferences. Refer to page 17 for instructions.
2. Select the Utility tab.
3. Select Status Monitor... The Status Monitor window opens, with the Status tab active.
4. View the ribbon information:
•
Estimated percentage and number of prints remaining on the print and retransfer ribbons.
•
Current printer status.

Note: If you remove a ribbon from the Everest printer and reinsert it, the system recognizes the amount of ribbon
remaining in the consumable monitoring application. Partially used ribbons from other Everest printers will not
display accurately in the consumable monitoring application.
5. To reset the estimate for the number of prints remaining on the retransfer ribbon, use the procedure below.
a. Select Options... The Reset prints remaining window displays.
b. If you are using a 500-print ribbon, check the Use 500 print retransfer ribbon box.
c. Select Reset prints. The Reset prints window displays.
d. Select Yes to confirm the reset. The Reset prints and Reset retransfer prints remaining windows close.
e. Select Close to close the Status Monitor window.
2000621_B
Set Your Printing Preferences
23