Maintain The Prism Printer; Cleaning The Printer; Clean The Exterior; Clean The Print Head - Rimage PrismPlus! Benutzerhandbuch

Maintain the Prism Printer

Use the procedures in this section to keep your Prism printer in peak operating condition.

Cleaning the Printer

Clean the exterior

Wipe the exterior of the printer with a lint free cloth.

Clean the print head

Clean the print head at every ribbon change, or more often if streaks start appearing or the ribbon has torn.
This procedure requires the Prism cleaning kit (PN 210555-001). This kit includes the necessary cleaning
pads and solution.
1. Prepare the Prism.
a.
b.
c.
d.
e.
2. Prepare the cleaning pad.
a.
b.
3. Clean the print head.
a.
b.
c.
d.
e.
f.
g.
110635_I
Downloaded from www.Manualslib.com
Power down the Prism.
Remove the top cover.
Remove the ribbon. Refer to Changing the print ribbon on page 14.
While pressing the operator button, power on the Prism.
When the Disc Not Present indicator light flashes, release the operator button.
Remove the adhesive backing from the cleaning pad.
Adhere the cleaning pad to the top of a disc.
Place the cleaning pad with attached
disc on the tray.
Press the pad down over the sensor.
Place 5 drops of cleaning solution on the
cleaning pad.
To close the tray and start the cleaning cycle, press the operator button. When the cleaning cycle
is complete, the tray opens.
If necessary, repeat step d.
Remove the cleaning pad with attached disc.
Using a cotton swab soaked in the cleaning solution, clean the front two ribbon guides.
manuals search engine
Maintain the Prism Printer
Press pad down
over sensor
Cleaning pad with
attached disc
Front Ribbon Guides
Cleaning Pad
Cleaning Solution
13