Printer Requirements; Ribbon Requirements; Everest 600 Ribbons; Everest Iii Ribbons - Rimage Everest III Benutzerhandbuch

Printer Requirements

This section describes ribbon, label design, and print requirements for the Everest printer.

Ribbon Requirements

-
Important!
•
Rimage only supports the use of Rimage brand ribbons in our printers. Printer issues that occur as a result of using
ribbons from manufacturers other than Rimage are not included under your Rimage warranty or maintenance
agreement.
•
For optimum results, make sure that Everest ribbons are stored at a temperature between 41° and 95°F (5° to 35°C)
and humidity level between 45% and 85%.
•
Avoid moisture and direct sunlight.
•
Do not reuse ribbons.
•
Use only ribbons designed for your model of Everest printer. Refer to the tables below.
The Everest printer requires a print ribbon and a retransfer ribbon. The standard print ribbon has three colors: Cyan, Magenta,
and Yellow (CMY). These three colors combine in printing to create full-color discs. Print ribbons are also available in black
and CMY+White. CMY+W is available for Everest III only.

Everest 600 Ribbons

Ribbon Type
3-Color (CMY)
Black (monochrome)
Retransfer ribbon (1000 prints)

Everest III Ribbons

Ribbon Type
3-Color (CMY)
4-Color (CMY+W)
Black (monochrome)
Retransfer ribbon (500 prints)
Retransfer ribbon (1000 prints)
2000621_B
Everest 600 Part
Number
2000487
2000490
2000491
Everest III Part
Number
203638-001
203639-001
203640-001
203474-001
203384-001
Printer Requirements
Number of Discs
Printed
500
1000
1000
Number of Discs
Printed
500
375
1000
500
1000
9