Printer Requirements; Ink Requirements - Rimage 2000i Benutzerhandbuch

Printer Requirements

This section describes the ink, label design, and print requirements for the Rimage 2000i.

Ink Requirements

-
Important!
•
Use only authentic Rimage ink cartridges in the Rimage 2000i.
•
Keep print cartridges sealed in their original packaging until they are needed.
•
Do not use ink cartridges that have expired.
•
Store print cartridges at room temperature (60° to 78° F or 15.6° to 26.6° C).
•
Store print cartridges in an upright position, not on their sides or upside down.
•
Do not remove the protective tape from a new print cartridges until immediately before installation. After you remove
the tape, do not reapply it.
•
After you have removed the protective tape, do not touch the contacts and nozzles.
•
Print discs at least once a month to keep the print cartridges in good working order.
The Rimage 2000i will work only with the following printer cartridges:
Description
Black
Color
The following cartridge combinations are supported on the Rimage 2000i printer:
Left Position
Color
Color
No cartridge
100763_M
Downloaded from www.Manualslib.com
Rimage Part Number
RB1 203340-001
RC1 203339-001
Right Position
Black
No cartridge
Black
manuals search engine
Printer Requirements
9