Selecting The Auto Brew Start Time; Starting Automatic Operation - Gastroback Design Coffee Aroma Plus Bedienungsanleitung

WARNING:
while connected to the power supply, and during operation. Thus, special care is
necessary to avoid injuries to persons or damage caused by fire, electric shock or
hot liquids and steam. Thus, closely and meticulously keep to the instructions in
the section Important Safeguards. Always ensure that you prepared the coffeema-
ker correctly and completely for the brewing cycle, before activating automatic
operation.
We strongly recommend, performing and attending a normal brewing cycle
to learn, how to operate your coffeemaker correctly, before using automatic
operation. In this way you will recognize problems, arising from the handling
your coffeemaker.

SELECTING THE AUTO BREW START TIME

Note:
For adjusting the start time the clock must be set (See: "Adjusting the Clock").
1. Press the PROGRAM button. The light will flash and the auto brew time is being
selected.
2. Adjust the time you want to start the brewing cycle by using the HOUR and MIN
buttons following the procedure for setting the clock.
3. To confirm your auto brew start time, simply press the PROGRAM button and the
preseted time is displayed for a few seconds on the display. The PROGRAM
light will continues to flashing while confirming the preset auto-brew time. It will
automatically return to the current time after a few seconds.

STARTING AUTOMATIC OPERATION

WARNING:
ance unattended while connected to the power supply and during operation.
Always ensure that the coffeemaker is prepared correctly and completely for
a brewing cycle, according to the instructions in section Preparing Some Cups
of Coffee, before starting automatic operation, and leaving the coffeemaker
unattended.
Especially ensure that the filter basket and glass carafe are inserted correctly and
the cover of the coffeemaker is closed properly.
42
Please keep in mind that the coffeemaker will be left unattended,
Special care is necessary, when leaving any electrical appli-