Stopping charging
♦
Disconnect the charger 9 from the mains power supply .
♦
Disconnect the USB-C plug on the charging cable
charging socket 5 .
Changing bits/screw driver bits (see fig . B)
Inserting:
♦
Insert the bit into the tool holder
Removal:
♦
Pull the bit out of the tool holder
Operation
Switching the cordless screwdriver on/off
Switching on
♦
To start the appliance, press the ON/OFF switch 6 and keep
it pressed in .
Switching off
♦
Release the ON/OFF switch 6 to switch off the appliance .
Changing the direction of rotation
Clockwise
♦
Push the rotation direction switch 1 to the left .
♦
Press the ON/OFF switch 6 . The clockwise rotation indicator
2 lights up . You can now screw in the screws .
■
40
│
GB │ MT
9b
.
.
from the
PAS 4 C4