Before Use; Charging The Appliance Battery (See Fig . A); Start Charging - Parkside Pas 4 C4 Originalbetriebsanleitung

Before use

Charging the appliance battery (see fig . A)
NOTE
► The battery is supplied partially charged . Before first use,
charge the battery in the charger for at least 1 hours . This
guarantees full battery power . Li-ion batteries can be
charged at any time without adversely affecting their service
life . Interruption of the charging process will not damage the
battery .
► If the battery charge level indicator 3 lights up red during
use, the battery is at less than 30% of its capacity and needs
to be charged .
► Never charge the cordless appliance when the ambient
temperature is below 10°C or above 40°C . If a lithium-ion
battery is to be stored for an extended period, the charge
level should be checked regularly . The optimum charge level
is between 50% and 80% . The storage climate should be
cool and dry and the ambient temperature should be
between 0°C and 50°C .

Start charging

♦ Connect the USB-C plug on the charging
9b
cable
♦ Connect the USB plug of the charging cable
9 .
♦ Connect the charger 9 to a 100 – 240 V ∼
50 – 60 Hz power source .
The battery is fully charged when the battery level display 3 chang-
es from red to green .
PAS 4 C4
to the charging socket 5 .
9a
to the charger
GB │ MT │ 39 ■