Herunterladen Inhalt Inhalt Diese Seite drucken

Changing Bits/Screw Driver Bits (See Fig. D); Replacing The Cutting Blade (See Figs. E + F); Operation; Switching The Cordless Screwdriver On/Off - Parkside PAS 4 C4 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PAS 4 C4:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 53
Changing bits/screw driver bits
(see fig. D)
Inserting:
Insert the bit into the tool holder
Removal:
Pull the bit out of the tool holder
Replacing the cutting blade
(see figs. E + F)
NOTE
Before carrying out any work on the
appliance, ensure that the rotation direction
switch
is in the middle. This prevents
unintentional switching on.
Start by connecting the cutting attachment
to the appliance. This blocks the motor spindle
and allows the screw to be removed.
Unscrew the screw (I).
Remove the cutting blade (II) by pulling it
downwards.
Push in a new cutting blade (II) from below
ensuring that the ground edge of the blade
faces you.
Turn around the blade (II) until it fits onto the
tool fitting (III).
Tighten the screw (I).
The attachment can now be used again.
CAUTION!
There is an arrow ( ) on the blade guard
of the cutting attachment. This shows you
the recommended running direction of the
cutting blade.
44
 │ GB│MT

Operation

Switching the cordless screwdriver
on/off
.
Switching on:
To start the appliance, press the ON/OFF
switch
.
Switching off:
Release the ON/OFF switch
appliance.

Changing the direction of rotation

Clockwise:
Push the rotation direction switch
Press the ON/OFF switch
rotation indicator
screw in the screws.
Anti-clockwise:
Push the rotation direction switch
Press the ON/OFF switch
rotation indicator
unscrew the screws.
Safety lock-out:
Push the rotation direction switch
middle position. The ON/OFF switch
blocked.
NOTE
When the ON/OFF switch
still possible to activate the LED lamps
To do this, press the ON/OFF switch

Tips and tricks

Screw bits are labelled according to their dimen-
sions and their shape. If you are unsure, always try
the particular screw bit out to see whether it sits in
the screw head without any free play.
and keep it pressed in.
. The clockwise
lights up. You can now
. The anticlockwise
lights up. You can now
is locked it is
to switch off the
to the left.
to the right.
into the
is
.
.
PAS 4 C4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis