Changing Rotary Direction; Safety Lock; Changing Bits - Parkside PWBM A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Stop charging
Disconnect the USB cable
Disconnect the charger
˜ Changing rotary direction
Push through the rotation direction switch
(Fig . C):
Switch pushed from
Right
Left
˜ Safety lock
Set the rotation direction switch
equally on both sides . The switch trigger
setting .
˜ Changing bits
Pull out the bit . Insert another type of bit into the bit holder
NOTE: Screw bits are labelled according to their dimensions and their
shape . If you are unsure, always try the particular screw bit out to see
whether it sits in the screw head without any free play .
from the product .
[ 10 ]
from the socket-outlet .
12 ] [
Direction
(b) Tighten screws
Loosen screws
(a)
to the middle position so that it protrudes
5 ] [
to set the rotary direction
5 ] [
Direction indicator
cannot be pressed in this
7 ] [
2 ] [
4 ] [
(Fig . D) .
1 ] [
GB/IE 53