Battery Tool Use And Care - Parkside Pas 4 C4 Originalbetriebsanleitung

5 . Battery tool use and care

a)
Recharge only with the charger specified by the manufac-
turer. A charger that is suitable for one type of battery pack
may create a risk of fire when used with another battery
pack .
b) Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire .
c)
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire .
d)
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medi-
cal help. Liquid ejected from the battery may cause irritation
or burns .
e)
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit unpre-
dictable behaviour resulting in fire, explosion or risk of injury .
f) Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above 130 °C
(265°F) may cause explosion .
g) Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range speci-
fied in the instructions. Charging improperly or at tempera-
tures outside the specified range may damage the battery
and increase the risk of fire .
CAUTION! RISK OF EXPLOSION! Never charge
non-rechargeable batteries!
■ 36 │ GB │ MT
PAS 4 C4