C) Starting The Boat - Reely 2147829 Bedienungsanleitung

c) Starting the boat

Important!
Before placing the boat on the water, always check that the
remote control and boat are fully charged and communicating
with each other.
Turn on the remote control by sliding the on/off switch to the
ON position.
Turn on the boat by pushing the on/off switch in the direction
of the LED battery indicators. The LED indicators will light up
when the boat is on and will show the battery level.
Check that basic remote controls for speed and direction are
working:
Move the steering wheel forwards and backwards.
Pull/push the throttle backwards and forwards.
In both instances you should hear the motors start up and the
boat should move as directed.
Important!
If the boat does not respond as you expect for either of these functions, check the following:
The steering mode switch and throttle mode switch are set to "NOR" for normal operation.
The steering speed dial and the speed adjustment dial are set to a value higher than "0".
Important!
When you have finished fishing and the boat has returned to the water's edge, retrieve it from the water, turn it off and
place it on land. Then turn off the remote control.
Always keep the remote control turned on while the boat is in use to avoid any possibility of loss or damage to the
boat or other users on the waterway.
The ship is now ready to be sailed.
26