Adjusting chisel position
You can rotate the tool to the required position for
chiselling using this function .
♦
Turn the function selector switch
position .
♦
Turn the tool in the tool holder
required position .
♦
Turn the function selector switch
position
for the chiselling function .
Select direction of rotation
♦
Select the direction of rotation by adjusting the
right/left rotation switch
WARNING!
►
The right/left running switch
be used/adjusted if the appliance is at a
standstill .
Switching on and off
Switching the appliance on
♦
Press the ON/OFF switch
Switching the appliance off
♦
Release the ON/OFF switch
Switching to continuous operation
♦
Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button
.
Switching off continuous operation
♦
Press the ON/OFF switch
again .
PBH 1050 C3
to
to the
to
.
may only
.
.
. Lock it in the
and release it
Preselecting rotational speed
You can use the speed preselector wheel
preselect the rotational speed . Level 1 (low rota-
tional speed) up to level 6 (high rotational speed) .
The speed you select depends on the material to
be processed . Work out the right setting with this
practical test:
- Levels 4 – 6: high rotational speed:
for hammer drilling/chiselling in concrete or
stone .
- Levels 1 – 3: medium rotational speed:
for drilling in steel or wood .
NOTE
►
The set speed is only reached in continuous
operation .
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■
Never permit liquids to enter inside the appliance .
■
Use a soft, dry cloth to clean the housing .
■
Clean the tool holder
CAUTION! PRELOADING!
♦
To do this, pull the locking collar
and pull the dust protector cap
holder
.
♦
Before fitting a tool into the tool holder
grease it lightly .
WARNING!
►
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards .
NOTE
►
Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline .
to
regularly:
backwards
off the tool
GB │ IE │ NI │ CY
│
,
7
■