Operation; Select Operating Mode; Select Direction Of Rotation; 2-Speed Gearbox - Parkside PSBM 1100 A1 Originalbetriebsanleitung

♦ If necessary, use the reducer
onto the dust extraction adapter
♦ Switch the dust extractor on when making drill
holes .
♦ To detach the extractor, follow the above steps
in reverse order .

Operation

Select operating mode

Function selector:
♦ Turn the function selector switch
required symbol engages:
Function
Drilling/screwing
Impact drilling

Select direction of rotation

WARNING!
► The rotation direction switch
used/adjusted if the device is at a standstill .
♦ Select the direction of rotation by pressing the
rotation direction switch
right .

2-speed gearbox

CAUTION!
► Operate the speed selector
appliance is at a standstill . Otherwise, the
appliance can be damaged . If it is not
possible to move the selector, briefly press
the ON/OFF switch
► Press the speed selector
the lower half of the dial! Press and
hold the release button of the speed
selector
so that the required gear
engages at the marking .
PSBM 1100 A1
by pushing it
.
so that the
Symbol
may only be
towards the left or
only when the
and then try again .
only in
. Turn the speed selector
In first gear (speed selector switch
tion: 1)
This setting is suitable for all screwing work, work
using a large-diameter drill, and the use of acces-
sories .
In second gear (speed selector switch
position: 2)
This setting is suitable for carrying out drilling work
with a small-diameter drill .

Preselecting the rotation speed

You can use the rotational speed preselector adjust-
ing wheel to preselect the rotational speed .
The speed you select depends on the material to
be processed . Work out the correct settings by
carrying out a test .
NOTE
► The appliance only reaches the set rotational
speed during continuous operation .

Switching on and off

Switching the appliance on:
♦ Press the ON/OFF switch
Switching the device off:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch
again .

Maintenance and cleaning

WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work on the appliance.
in posi-
in
.
.
. Lock it in the
and release it
GB │ IE │ NI │ 7 ■