Day-To-Day Operation; Delivery Of The Coffee - LaCimbali M100 Gebrauch Und Installation

"Before setting the machine at work, make sure that:
• the main electric power switch is on;
• the mains water cock has been turned on".
1
Press the luminous main switch to turn on
the machine.
Unhook filter holder and empty the coffee grounds of the
previous coffee in the dregs drawer.
Fill the filter with one dose of ground coffee in the case of the
1-cup filterholder with conical filter or with two doses of ground
coffee in the case of a 2-cup filterholder with cylindrical filter.
Uniformly press the ground coffee in the filter holder by means
of the pressing disc of the grinder.
Clean the filter rim in order to eliminate the eventual ground
coffee.
Hook filterholder to the group and put one or two cups
underneath of the delivery spouts of filter holder.
Press the coffee dispensing key corresponding to the preferred
dose. The selected key will remain lit and the coffee will be
dispensed. It will stop automatically.
Press the push button
Dispensing, whether for dosed servings or in the continuous
dispensing mode, can be interrupted at any time by pressing
the push button .

6. Day-to-day operation

2
CHECK BOILER
ON
During this phase, the boilers (only on
"HD / GT" machines) are loaded and the
heating phase begins.

7. Delivery of the coffee

for continuous dispensing.
USE
3
The preset working pressure must be
reached before the machine is ready
for use.
6 EN
English
English