Programming Measures Function - LaCimbali M100 Gebrauch Und Installation

1
Press the icon .
1
Press the key ; a red outline and
the buzzer indicate the SELF-LEARNING
phase.
4
The value of the impulses of the
volumetric dosing device will appear on
the display.
Continue to program all the coffee keys,
repeating the steps starting with number 2.

Programming measures function

2a
Press one of the coffee keys.
2b
Press the water key.
Programming measures using the "SELF-LEARNING" function
2
Hook the filter holder with the dose of
ground coffee to the group.
5
Afterwards, confirm the values by pressing
the key .
11 EN
Use the "+" and "-" keys to memorize the
water doses for each dispensing keys.
The AUTO key makes it possible to
program water doses with the SELF-
LEARNING function (see specific
paragraph).
These parameters can be configured:
SET... - to set the dispensing time;
% - to set the water temperature.
3
Place the cup or cups
underneath the filter
holder nozzles and
press the key to be
programmed.
When the desired level
is reached in the cup
or cups, press the key
again.