Day-To-Day Operation; Changing The Water In The Boiler - LaCimbali M100 GT Gebrauch Und Installation

"Before setting the machine at work, make sure that:
• the main electric power switch is on;
• the mains water cock has been turned on".
1
Press the luminous main switch to turn
on the machine.
1 1
Press the key SET
02_M100_multi_ridotto.indd 9
USE

10. Day-to-day operation

2
CHECK BOILER
ON
During this phase, the boilers (only on
"HD / GT" machines) are loaded and
the heating phase begins.

11. Changing the water in the boiler

2 2
.
Press the key
3
The preset working pressure must be
reached before the machine is ready
for use.
3 3
The following message will be
.
displayed: "WATER CHANGE". The
water from the boiler will drain from the
total capacity).
Dispensing will stop automatically.
After the procedure, the machine will
return to its normal functions and the
9 EN
WATER CHANGE
11/03/2014 10:27:53