Sequential Washing - LaCimbali M100 Gebrauch Und Installation

SEQUENTIAL WASHING

1
EXECUTE GROUP 1
WASH
The sequential washing mode appear on
the display.
4
Insert the rubber disk into the filter-holder
with its filter.
7
EXECUTE GROUP 1
WASH
Press the key
10
REMOVE FILTER HOLDER
GROUP 1
push
At the end of the group 1 wash cycle, the
message "REMOVE FILTER HOLDER
GROUP 1" will appear.
13
EXECUTE GROUP 2
WASH
push
At the end of the group 1 rinse cycle, the
message "EXECUTE GROUP 2 WASH"
will appear.
2
Remove the filter holder from the coffee
group.
5
Pour in a packet or dosing cupful of
detergent powder.
8
INSERT FILTER HOLDER
GROUP 1
. Press the key
11
Remove the filter holder and press the
key
14
Repeat the operations described above
for all machine groups.
push
.
.
16 EN
English
3
Using a brush, clean the cover gasket.
6
H o o k t h e f i l t e r h o l d e r
Group 1.
9
GR 1 WASH
The Group 1 wash cycle will start and
the "GR1 WASH" message will appear
on the display.
12
GR 1 RINSE
The message "GR1 RINSE" will appear.
English
t o