LaCimbali M100 Gebrauch Und Installation Seite 52

SINGLE WASHING: Cannot be carried out if the machine launches a warning message.
1
Press the key SET .
4
Choose the group to be washed.
7
Insert the rubber disk into the filter-holder
with its filter.
10
Press the key
13
Remove the filter holders and press the
key .
2
Press the key
5
Remove the filter holder from the coffee
group.
8
Pour in a packet or dosing cupful of
detergent powder.
11
GR ... WASH
The group wash cycle will start and the
"GR... WASH" message will appear on
.
the display.
14
GR ... RINSE.
The message "GR... RINSE" will appear.
3
. Press the key
6
Using a brush, clean the cover gasket.
9
Hook the filter holder to the group.
12
At the end of the group wash cycle, the
message "REMOVE FILTER HOLDER
GROUP ..." will appear.
15
The washing cycle is complete after the
rinsing phase.
Repeat these steps for the groups you
want to wash.
18 EN
English
.
REMOVE FILTER HOLDER
GROUP ...
push
English