DePuy Mitek FMS DUO+ Bedienungsanleitung Seite 43

SYMBOLS PAD
Run/Stop
Shaver
Shaver speed
selection pad
Shaver speed
increase
Shaver speed
decrease
Lavage
(activation)
Lavage
(cancellation)
Pinch Valve
FUNCTION LED
Starts the
Orange
shaver console
Orange
Factory (LED
preselected indicates
shaver speeds chosen
level)
Increases
the shaver
rotation speed
in increments
of 100 RPM
Decreases the
shaver rotation
speed in
increments of
100 RPM
Sets off
sequence of Green
pressure and (Blink)
flow increases
Cancels
the Lavage
sequence
Pinch Valve Green (blink
moves from until pressed
right to left once)
45
SOUND DISPLAY COMMENTS
Pressing the
pad a second
1 Beep 4000
time will stop the
shaver console.
Low = 2000 RPM.
1 Beep Med = 4000 RPM.
High = 7000 RPM.
Preselected
Maximum speed
1 Beep shaver
8000 RPM.
speed
Preselected
Minimum speed
1 Beep shaver
400 RPM.
speed
Pressure
Cycle last
1 Beep on LCD will
2 minutes.
increase
Pressure
Cycle is
on LCD
cancelled
drops
2 Beeps by pressing
back to
the lavage
preselected
mode again.
base level
Pinch Valve will
move back to
1 Beep
original position
after 5 seconds.