INSYS CombiLock 200 simplex Handbuch Seite 68

CombiLock 200 simplex / pro / pro RFID
7.2.4 Shorten Spindle B and mount it
With spindle variant B shorter than specified here,
manipulation of the system might be possible.
Make sure the spindle is not shorter than specified here.
Shorten the spindle:
- to depth of safe door (Depth safe door = D mm) + length attached to lock and to
operating unit (with spindle variant B a total of approx. 38.2 mm).
Required spindle length with new CombiControl CL38 = D mm + 38.2 mm.
Shorten spindle variant B for system with previous CombiControl to spindle length
= T mm + 41.5 mm (see above) and lead the wires through the spindle centre.
Handbuch V.1.09A
Caution
68 INSYS locks